NcStar




Product Image Item Name- Price
.300 Winchester Mag. Cartridge Red Laser Bore Sighters / TLZ300W

.300 Winchester Mag. Cartridge Red Laser Bore Sighters / TLZ300W

FEATURES: • .300 WIN Laser Bore Cartridge - Fits .300 WIN firearms • Red Laser: 635-655nm, Max output <5mw, Class IIIa Laser • Easy to use, just install the batteries into the Laser cartridge and screw on the base, which turns the laser on. Remove Batteries to turn unit off • Factory Pre-Aligned Cartridge Bore Sighters, helps with Zeroing your optics • Aluminum Construction • Length: 2.6" • Weight: 0.6 oz All items are Brand New w/ Full Manufacture Warranty ____________________________________
$14.99

Add:

10/22 Combo #9 - Mount + Trirail + Red Dot w/ Laser + Taclight

10/22 Combo #9 - Mount + Trirail + Red Dot w/ Laser + Taclight

Includes the following items: Item #1: Weaver 10/22 Scope Mount Rail FEATURES Made in the USA by WeaverMaterial: AluminumColor: Matte BlackWeight: 1.1 ounceLength: 4.75"Width: 7/8" This tactical mount provides a mounting rail that will fit most Weaver/Picatinny style scopes and accessories. Provides 11 cross slots for adjusting your optics. Bolts directly to the factory screw holes on your 10/22 rifle. Easy bolt on installation with includes allen screws. Bolts to the 4 factory screw holes on top of the 10/22 rifle. Includes 4 mounting screwa Item #2: Tactical Trirail Mount FEATURES Made by NcStarColor: BlackWeight: 7.2 ouncesLength: Approx 5 1/4 inchesHeight: Approx 1 1/4 inches| Attaches to any weaver base mounting rail on a rifle, carbine or shotgun. Features three weaver type rails for mounting lasers, tactical flashlights, flip up back up sights, scopes and red dots, etc. Top rail measure 5 1/4 inches long. The side rails measure 1 3/4 inches long. Each side rail has...
$112.95

Add:

5.56/.223 Barrel Bore brush w/MIL-Spec thread

5.56/.223 Barrel Bore brush w/MIL-Spec thread

FEATURES: • 5.56/.223 Barrel Bore Brush with MIL-SPEC threads. • G.I. bore brush replacement. • Works with G.I. cleaning rods/ kits/ threads. • Cleans .22 caliber barrel bores. • Bronze bristles to remove carbon, powder, and bullet residue, but it will not damage bore. • Diameter: 0.24" • Weight: 0.2 oz. All items are Brand New w/ Full Manufacture Warranty ____________________________________
$3.99

Add:

AK Combo #15 - Sight N' Lights

AK Combo #15 - Sight N' Lights

THIS ITEM QUALIFIES FOR FREE SHIPPING FEATURES: • Trick out your AK Style Rifle with the Sights N’ Lights AK Combo and you will be ready to Sight In and Light up your targets with ease. • Equipped with a fixed 4x30 scope and Bright 65 Lumen flashlight you will be ready to handle business in any conditions. • Simply replace your existing bolt cover with this AK Tri-Rail Scope Mount and you will have everything you need in a compact package. • The Sights N’ Lights AK Combo comes complete with AK bolt cover Tri-Mount, 4x30 Compact Scope, 1” Weaver Style Split Rings, LED Flashlight and Pressure Switch. SPECIFICATIONS: • Model # SC430B: Fixed 4X magnification compact scope with a 30mm objective lens • Model # RB29: 1" Weaver style Scope rings • Model # ATFLB: 65 Lumen LED 1" body Flashlight with mount • Battery type: CR123A lithium (2 each Included) • Model # AFWS:Remote Pressure Switch for Flashlight All Items...
$79.99

Add:

AK47 Dust Cover Scope Mount for Micro Dot Sight Gen 2

AK47 Dust Cover Scope Mount for Micro Dot Sight Gen 2

FEATURES Made by NcSTAR Material: Aluminum (Rail) and Steel Construction (Dust Cover) Length: 9.5" Weight: 7.3 oz Newest Gen 2 design incorporates a three front tabs and two rear screws to provided a secure fit This is a Top Rail Dust Cover with Picatinny rail amount and Integral rear mount for micro dot reflex sight Replaces existing AK-47 top cover On some rifles minor fitting may be requires on the dust cover mount to achieve a nice tight custom fit Fits Russian spec AKM pattern rifles ( Russian, Chinese, Romanian, Polish, Hungarian, Egyptian ) with a stamped receiver Only fits rifles with the following calibers 7.62X39, 5.54X39, .223 Does Not fit Yugo rifles Does Not fit milled receivers Provides a dedicated Micro Dot mount for installing a Micro Dot directly to your AK with the lowest possible mounting height Provides a Picatinny type rail on top for attaching optics Low Profile Design Does Not Interfere with Rifles Iron Sights Brand New With Manufacture Warranty Against...
$23.95  $19.99
Save: 17% off


Add:

AK47 Low Profile Dust Cover Tactical Picatinny Scope Mount Gen 2

AK47 Low Profile Dust Cover Tactical Picatinny Scope Mount Gen 2

FEATURES Made by NcSTAR Material: Aluminum (Rail) and Steel Construction (Dust Cover) Length: 9.5" Weight: 7.3 oz Newest Gen 2 design incorporates a three front tabs and two rear screws to provided a secure fit This is a Top Rail Dust Cover with Full Length Picatinny top rail amount Replaces existing AK-47 top cover On some rifles minor fitting may be requires on the dust cover mount to achieve a nice tight custom fit Fits AKM pattern rifles with a stamped receiver (7.62X39, 5.54X39, .223) Provides a Picatinny type rail on top for attaching optics Low Profile Design Does Not Interfere with Rifles Iron Sights Brand New With Manufacture Warranty Against Defects ____________________________________
$29.95  $19.99
Save: 33% off


Add:

AK47 Mak90 Scope Mount Rail with Micro Green Dot Reflex Sight

AK47 Mak90 Scope Mount Rail with Micro Green Dot Reflex Sight

MOUNT FEATURES Made by VISM Material: Aluminum (Rail) and Steel Construction (Dust Cover) Length: 9.5" Weight: 7.3 oz Newest Gen 2 design incorporates a three front tabs and two rear screws to provided a secure fit This is a Top Rail Dust Cover with Picatinny rail amount and Integral rear mount for micro dot reflex sight Replaces existing AK-47 top cover On some rifles minor fitting may be requires on the dust cover mount to achieve a nice tight custom fit Fits AKM pattern rifles with a stamped receiver (7.62X39, 5.54X39, .223) Provides a dedicated Micro Dot mount for installing a Micro Dot directly to your AK with the lowest possible mounting height Provides a Picatinny type rail on top for attaching optics SIGHT FEATURES Made by NcSTAR Dimensions: 23.5mm X 16.8mm Objective lens Material: Aluminum Body Color: Anodized Matte Black Activation via on/off switch on the back of unit Long Lasting LED (Light Emitting Diode) Provides a Bright Green Aiming Dot Includes CR2032 common...
$99.99  $59.99
Save: 40% off


Add:

AK47 MAK90 Threaded Muzzle Brake Recoil Compensator 14mm LH

AK47 MAK90 Threaded Muzzle Brake Recoil Compensator 14mm LH

FEATURES All steel constructions Imported Black finish Weight: Approx 5.3 ounces Length: 2.9" Standard AK47 thread pattern: 14mm - 1.0 left hand threads Only fits 7.62x39 threaded rifle barrels Ported at the top with 2 holes and also 2 wide slot openings in the front to help reduce felt recoil and muzzle climb Similar in design to the popular muzzle break from the AK-74 rifles Screws on to existing threads on barrel. This muzzle brake will help to tame the recoil on your rifle thus making shooting more comfortable and your rifle easier to shoot Brand New w/ Full Manufacture Warranty ____________________________________
$12.99

Add:

AK47 Replacement Cleaning Rod

AK47 Replacement Cleaning Rod

Material: Made from Carbon SteelColor: Anodized black finishThread: 8-32 Includes one cleaning rod for Mil-Spec AK47 rifles. Now you can replace missing or broken cleaning rods, or just keep a spare in your tool kit just in case. All items are Brand New w/ Full Manufacture Warranty ____________________________________
$6.95

Add:

Ambidextrous Modular MOLLE Holster - Multiple Colors

Ambidextrous Modular MOLLE Holster - Multiple Colors

FEATURES : Colors (Black, ACU Style Digital Camo, Green, Tan, Urban Gray) Fits most mendium and full size pistols including Glock 17 19 22 23 20 21 37 31 38 32, SIG P220 P226 P227 P229 SP2022 1911 Mosquito, Hk 9mm and .40 USP and USPC, Hk P2000 P30, Ruger P85 P89 P90 SR9 SR40, Beretta M9 92 96, S&W M&P M&P9c M&P40c, Springfield XD XDM, Taurus 24/7 OSS PT92, FN FNS FNP FNX, Walther P22 P99, Colt .45 1911 M1911A1 and similar clones    Innovative Ambidextrous Modular MOLLE Holster that is fully configurable for Full Size and Compact semi autos without or with tactical flashlights/lasers. With a Grid of Eyelets, this holster can be configured to fit various sizes and shapes of pistols. It can also be custom configured to fit around Tactical Flashlights/Lasers mounted onto the frame of the Pistol. With the use of the supplied tube spacers and bungee cords, the holster can be custom fitted to most Pistol without or with tactical flashlights and/or lasers....
$14.95

... more info



Upcoming Products
These items will be in stock soon
Item Name Date Expected
VISM GEN3 Mark III Tactical 3-9x40 Mil-Dot QD Rifle Scope 12/25/2017
5 Pack - MAGPUL AR15 PMAG M3 40rd Black Magazines 12/25/2017
Daniel Defense Collapsible AR15 Black Mil-Spec Buttstock 12/25/2017
Copyright © 2017 m1surplus.com