VISM Gen 3 Pro Series AR15 M4 Barrel Nut Armorers Wrench Tool

  • Model: CN/VTARW3
  • 100 Units in Stock
  • Manufactured by: VISM

 Ask a Question 

$32.99

Add to Cart:

FEATURES

  • Made by VISM
  • Material: Steel Construction
  • Length: 12.5 inches
  • Weight: 23 oz.
  • Generation 3 Pro Series AR15 Barrel Wrench Tool
  • Large heavy duty cross section makes it easier on the hands to work on your AR15 rifles
  • This heavy duty wrench provides the necessary weight and leverage to facilitate your job
  • With this this tool you can easily remove/install Mil-Spec AR15 barrel nuts
  • Does Not work with (.308/7.62) AR10, SR25, LR308 rifles
  • Makes for assembling/installing barrels and free float handguards a super easy task
  • The other end of the wrench is for installing/removing 5/8" muzzle brakes and flash hiders
  • 1/2" and 3/8 inch drive compatible, for torquing your barrel nuts to the proper torque specifications
  • All the parts of the tools are Clearly marked for easy identification
  • Hole at the end is for hanging tool on a wall peg, nail/screw
  • US Patent Pending
     
CALIFORNIA PROPOSITION 65 WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov


Brand New With Manufacture Warranty
____________________________________

It is the responsibility of the buyer to research and obey all applicable local, state, and federal laws in regard to the possession, use, and sale of any products purchased from M1Surplus.com

 


This product was added to our catalog on Thursday 18 May, 2017.

Manufacturers

Your IP Address is: 3.239.119.159
Copyright © 2024 M1Surplus.com - Your One Stop Shop For Hunting And Shooting Accessories. Powered by Zen Cart