AK Combo 4 Includes Trirail Mount + 4 Reticle Reflex
Sight + Red Laser
THIS
ITEM QUALIFIES FOR FREE SHIPPING
Includes the following items:
Item#1: AK47 Trirail Scope /
Accessory Mount
FEATURES
- Material: Steel and aluminum
- Color: Black
- Replaces original top receiver cover on rifle.
Will fit 7.62x39mm AK-47 / MAK-90 / Saiga type rifle with a standard
Military top cover. Stabilizer design includes 2 set screws to ensure
no
movement of scope mount. Total of 3 Weaver base mounting rails allow
for
mounting just about any scope, red dot, laser, tac light and other
aiming
devices. The side rails are each about 1" long and can be mounted on
various
positions along the sides
Item #2: Tactical 4 Reticle
Reflex Sight
FEATURES
- Color: Matte Black
- Lens coating: Ruby
- 4 different reticle patterns
- Built in weaver base mount
- Weight: 7.1 ounces
- Length: 3.25 inches
- Width: 1 1/8"
- Magnification: 1 power
- Objective diameter: 24mm high x 34mm tall
Adjustable for windage and elevation. Capable of withstanding
recoil from centerfire cartridges up to 7.62x39. Includes battery and
lens polishing
cloth. This sight can be used on any pistol, rifle, shotgun with a
weaver
base mount. You can switch between 4 different reticle patterns for
various
types of shooting scenarios. This sight allows very fast target
acquisition
with both eyes open. Perfect for competitive shooting competitions and
tactical scenarios.
Item #3: Tactical Adjustable Red Laser
FEATURES:
- Material: Aluminum
- Color of unit: Black
- Color of laser dot: Red
- Adjustable for windage and elevation
- Easy and quick to activate via a push
button permanent on/off switch on the tailcap
- Includes batteries and mount that is compatible with most
weaver/picatinny type rails
Installation is usually quick and easy but as with any other AK series
rifle, some minor fitting may be required to achieve a good custom fit.
Fitting operations are done exclusively to the mount and Not to your
rifle.
Typical fitting procedures can can be achieved with just a small file.
The
included trirail mount is a complete replacement for your rifles
existing
dust cover. This mount has set screws on the back which is useful on
rifles
that have loose tolerances as it helps to to prevent side to side
movement
that would through off your scopes zero. Installation instruction are
included.
- This item is NOT a drop-in
installation !
- Filing and fitting will be requires on
the dust cover mount to achieve a nice tight custom fit
- This item was designed specifically to
fit AK pattern rifles with true Mil-Spec dimensions
- Note that many Ak rifles have
inconsistent manufacturing dimensions and tolerances which can hinder
the installation of an aftermarket accessory like this
- We recommend you have a professional
gunsmith perform the installation
Click
here to view a manufacture produced installation guide for this item.
Please view this video before purchasing this item so that you can
fully understand all the steps involved in the installation process
CALIFORNIA
PROPOSITION 65
WARNING: This product can expose you to chemicals including Lead, which
is known to the State of California to cause cancer and birth defects
or other reproductive harm. For more information go to
www.p65warnings.ca.gov
Brand New With Manufacture Warranty
____________________________________
It is the responsibility of the buyer to research and obey all
applicable local, state, and federal laws in regard to the possession,
use, and sale of any products purchased from M1Surplus.com
This product was added to our catalog on Saturday 23 October, 2010.