M1A Combo #3 - Trinity 8-32x50 Rifle Scope + Mount + Cheekrest

$159.99

THIS ITEM QUALIFIES FOR FREE SHIPPING

Item #1: TRINITY 8-32X50 RIFLE SCOPE

FEATURES
  • Made by TRINITY FORCE
  • One piece anodized aluminum main tube
  • Color: Anodized Matte Black
  • Multi Coated Lenses
  • Eight to Thirty Two times Zoom Range
  • Quick Focus eyepiece
  • Reticles illuminate in Red with multiple brightness setting
    Includes one inch aluminum weaver style rings, lens caps, and an extra battery

SPECIFICATIONS
  • Mil Dot Reticle Pattern
  • Magnification: 8x-32x Variable Power
  • Tube Diameter: 1"
  • Objective Diameter: 50mm
  • Field Of View (FEET AT 100 YARDS) 11.5' with 8 x setting / 3.7' with 32x setting
  • Eye Relief: 3.35"-3.54"
  • Exit Pupil: 6.3mm - 1.6mm
  • Net Wwight: 27.16 ounces
  • Length: 19.88" ( with sun shade installed )
  • Click Value : 1/8" M.O.A

 

Item #2: LOW PROFILE SCOPE MOUNT FOR M1A M14 RIFLES

FEATURES

  • Net Weight: 6.4 oz.
  • Material: Aluminum
  • Color: Anodized Matte Black
  • Imported
  • Fits Mil Spec Springfield M1A M14 Rifles including Scout Squad
  • Also fits most Norinco M14 clone rifles
  • Two point locking system provides a stable platform for your optics
  • Low profile design with see through channel, allows use of iron sights
  • Will not fit Socom II
  • Allows for mounting your optics in a low ergonomic position on your rifle
  • Tools requires for installation: Punch, Hammer or Brass Mallet, sharp flat file, thread locking compound ( these tools are Not included )
  • Note that installation of this mount will require fitting procedures as detailed below:
    • Installation requires removal the rear stripper clip guide on your rifle by drifting out a pin and then tapping out the guide
    • An included replacement part that anchors the rear of the mount will then be filed to fit in place of the stripper clip guide
    • The mount can then be attached to the rifle with the include mounting hardware
    • Medium strength thread locking compound is required on all the bolts and screws to prevent things from coming loose
  • Includes detailed written installation instructions

 

 Item #3: TACTICAL CHEEKREST FEATURES

FEATURES

This is a universal design cheek rest made from thick heavy duty nylon webbing. Will fit most any rifle that has a traditional rifle style stock ( Does not fit collapsible or under folder stocks ). Provides an additional 7/8" stock height to allow for better scope to eye placement. Consistency in your cheek position is critical for good accuracy. To install just slide this item over your rifles buttstock and the tightens down with heavy duty nylon cord. Nylon cord has a plastic keeper to prevent anything from coming loose. Will fit AR15/AR10 rifles that have the old style A1 sttyle triangular shaped "non-collapsible" stocks

Cheek Rest Color: Your choice of black, green or tan
 



MAG POUCH DETAILS
 

  • Includes a detachable rifle magazine pouch which can be placed on either the right or left side of the cheek rest
  • Magazine pouch is a universal fit design and will fit one magazine (5.56/223/7.62x39 Caliber) and is adjustable to accommodate different height magazines
  • The pouch does not work well with .17/22. and other small caliber caliber magazines
  • The mag pouch will fit some .308/7.62 magazines (20 round size M1A, M14, SR25, AR308, LR308 )
  • Magazine pouch is held firmly in place via heavy-duty hook and loop type velcro material
  • The velcro on the side of the cheek rest is the soft side so as not to irritate your skin
MORALE PATCH DETAILS
 
  • Includes a USA PATRIOT FLAG Hook and Loop velcro compatible morale patch
  • Magazine pouch can be removed leaving an open space of hook and loop type velcro material which is is an ideal location for attaching morale patches
  • Show off the included USA PATRIOT FLAG Morale Patch proudly on the side of this cheekrest
  • You can also detach the patch and attach it to your other tactical gear
  • Morale Patch will connect directly to any surface that has military style hook and loop (velcro type) compatible material

 

This item qualifies for FREE shipping

Brand New With Manufacture Warranty

____________________________________

 

 

 


Add to Cart:

  • Model: MT/M14-2+SR14L83250+M1-CR+FLAG
  • Manufactured by: Imported


This product was added to our catalog on Tuesday 25 June, 2013.

Copyright © 2018 m1surplus.com