AK Combo 18 - VISM SOLAR Red Dot Sight + Top Cover Scope
Mount VDBSOL130 MAK
THIS ITEM QUALIFIES FOR FREE
SHIPPING
Item #1: VISM DUAL POWER QUICK DETACH SIGHT
FEATURES
- Made by VISM
- Material: Aluminum
- Color: Anodized Matte Black
- Dot Size: 2 MOA
- Dot Color: RED
- Objective Diameter: 30MM
- Weight: 11.7
- Length: 4.0"
- Lens Coating: RUBY
- Magnification: 1X ( Non-Magnified )
- Designed for fast instinctive target acquisition
- This SPD Tactical Sight has a Dual Power Source
- The Red Dot reflex optic can be powered by the sun via the
top mounted solar cell or the included AA battery.
- Solar cells mounted on top of the reflex sight will power
the red dot whenever there is sufficient sun light on the solar cells
- The Red Dot automatically turns on when there is sufficient
sun light
- The SPD Red Dot can also be powered by 1 common AA battery
( Included )
- AA battery should be used when there isn't enough sun
light, when using the optics indoors, or when using the optic at night
- The electronic control panel has a red LED indicator when
the Red Dot is powered by the AA battery
- Features an electronic control panel to turn on the Red Dot
under AA battery power
- You can adjust the brightness level up or down when powered
by the battery
- Red Dot centerline is at industry standard 1.5" AR15
Co-Witness height
- Integral locking quick release Picatinny mount
- Unlimited eye relief
- Reliable LED light source
- 2 MOA Red Dot has 5 levels of brightness ( brightness
settings are only adjustable when the AA power source is used )
Item #2: AK47 LOW PROFILE SCOPE MOUNT
FEATURES
- Made by NcSTAR
- Material: Aluminum (Rail) and Steel Construction (Dust
Cover)
- Length: 9.5"
- Weight: 7.3 oz
- Newest Gen 2 design incorporates a three front tabs and two
rear screws to provided a secure fit
- This is a Top Rail Dust Cover with Full Length Picatinny
top rail amount
- Replaces existing AK-47 top cover
- On some rifles minor fitting may be requires on the dust
cover mount to achieve a nice tight custom fit
- Fits AKM pattern rifles with a stamped receiver and
Mil-Spec dimension (7.62X39,
5.54X39,
.223 calibers) *
- Provides a Picatinny type rail on top for attaching optics
- Low Profile Design Does Not Interfere with Rifles Iron
Sights
- This item is NOT a
drop-in installation !
- Filing and fitting will be requires on the dust cover mount to
achieve a nice tight custom fit
- This item was designed specifically to fit AK pattern rifles with
true Mil-Spec dimensions
- Note that many Ak rifles have inconsistent manufacturing dimensions
and tolerances which can hinder the installation of an aftermarket
accessory like this
- We recommend you have a professional gunsmith perform the installation
Click
here to view a manufacture produced installation guide for this item.
Please view this video before purchasing this item so that you can
fully understand all the steps involved in the installation process
CALIFORNIA
PROPOSITION 65
WARNING: This product can expose you to chemicals including Lead, which
is known to the State of California to cause cancer and birth defects
or other reproductive harm. For more information go to
www.p65warnings.ca.gov
Brand New With Manufacture Warranty
____________________________________
It is the responsibility of the buyer to research and obey all
applicable local, state, and federal laws in regard to the possession,
use, and sale of any products purchased from M1Surplus.com
This product was added to our catalog on Friday 05 May, 2017.