AR Combo #7 - TriRail Mount + Laser + Dot Scope + Flashlight



Includes the following items:

Item #1: Tactical red laser sight with curly cord switch

  • Made by UTG
  • Material: Laser and mount made out of aluminum
  • Color: Matte black
  • Approx Dimensions: Height: 1-1/8" Length 2-1/4"
  • Batteries
  • Mount
Weaver style mount allows laser to fit most any Weaver/Picatinny rails and mounts, Includes two activation switches, The first is a push button permanent on/off switch, The second is a remote curly cord pressure switch that activates the laser with slight finger pressure and then deactivates laser when finger pressure is released. Curly Cord switch can be stretched out to fit in the most convenient location. Curly cord switch has double sided Velcro fastener with sticky tape for mounting purposes. Uses common watch type Batteries which are included. Manufacture warranty against defects.

Item #2: Tactical Tri-Rail Scope / Accessory mount

  • Made by NcStar
  • Color: Black
  • Weight: 7.2 ounces
  • Length: Approx 5 1/4 inches
  • Height: Approx 1 1/4 inches
Attaches to any weaver base mounting rail on a rifle, carbine or shotgun. Features three weaver type rails for mounting lasers, tactical flashlights, flip up back up sights, scopes and red dots, etc. Top rail measure 5 1/4 inches long. The side rails measure 1 3/4 inches long. Each side rail has 2 weaver type slots for mounting tactical accessories. The side rails can be move around to 3 different positions for ultimate flexibility to accommodate your specific needs. This mount is perfect for converting your rifle, shotgun or carbine to tactical configuration. Easy to install in just a few minutes with no gunsmithing required.

Item #3: UTG Tactical 38mm Red/Green Dot Scope


  • Made by UTG
  • Color: Matte black
  • Material: Aluminum
  • Length: 3.9"
  • Weight: 5.6oz
  • Magnification: 1x
  • Tube Diameter: 30mm
  • Objective Diameter: 26mm
  • Field of View @ 100 yards: 70' feet
  • Eye Relief: Unlimited
  • Exit Pupil: 22mm
  • Click Value @100 yards: 1/2" MOA
  • Parallax Setting: Infinity
  • Batteries: 1 x CR1620 3V ( Included )
  • Flip up lens covers
  • Quick Detach Mount
Finger click adjustable windage and elevation turrets, Windage/elevation turrets can be locked with included allen wrench to prevent accidental change to scopes zero, Reticle pattern: Illuminated Red/Green Dot, Side turret selects the color of the dos and adjusts the brightness settings, Made to withstand heavy centerfire rifle/shotgun recoil. This scope allows for fast target acquisition with both eyes open, Includes battery, flip up lens covers, lens polishing cloth, low profile quick detach mount, Cantilever quick detach mount. Low profile mount will fit most any Weaver/Picatinny rail. The compact size of this scope is ideal for tight installations or when weight is a major consideration. Both low profile and cantilever mount can be quickly attached/detached from your rail system in just a matter of seconds.

Item #4: Tactical 150 Lumen Compact LED flashlight

  • Made by AIM Sports
  • Color: Matte black
  • Weight: 2.5 Ounces
  • Length: 2-1/2"
  • Height: 1-5/8"
  • Body Width: 1"
  • Total Width 1-1/2"
  • Output: Approx 150 lumens
This is the most compact flashlight made by AIM. The dimensions of this light allow it to fit many different compact and sub compact pistols. Integral quick-detach mount will fit also attach to most any Picatinny/Weaver style scope mount and tactical rail systems on pistols, rifles and shotguns. Push button on/off activation switch, Uses common lithium battery. New LED technology gives you 50x longer life span than standard flashlight bulbs and up to 10x more battery life. Includes battery. Built to withstand heavy shock and recoil.

This tactical setup will fit most any rifle that has a pre-existing Weaver or Picatinny style rail. All items fit together with an easy bolt-on installation. Manufacture warranty against defects. Brand New This tactical setup could also be mounted on any other type of rifle or shotgun that has a Weaver or Picatinny style scope mount including the Hi-Point carbine and Kel-Tec SU16, SU22.

* This item cannot be shipped to Massachusetts, New York City or Puerto Rico *

All items are Brand New w/ Full Manufacture Warranty
This Item Qualifies For FREE SHIPPING !!!

Add to Cart:

  • Model: MTRIF+SCPLS268+FQ150SC+SCPDS3039
  • Manufactured by: M1Surplus

This product was added to our catalog on Monday 29 April, 2013.

Copyright © 2018