Mauser Combo #1 - Picatinny Rail Scout Mount + Scope Rings

$24.95  $18.99
Save: 24% off

MAUSER MOUNT FEATURES
   
    - Material: Aluminum
    - Color: Matte Black
    - Length of rail: 5.3" inches
    - Width of rail: 0.83" inches
    - Width of mount: 0.50" inches
    - Height of mount: 0.80" inches
     -Approx Weighs 2.4 ounces
    - Includes mounting screws and set screws
    - Requires No permanent modifications to your rifle
    - This mount replaces the rear sight leaf on your Mauser 98 rifle
    - Elevation setting of mount can be locked in place with included set screws
     -The rail on top will accept most Weaver/Picatinny type scope rings
    - Various cross slots provides some room to adjust eye relief on your optics
    - Provides a secure mounting platform to install your choice of optics
    - Fits K98 series rifles including Yugo series like the M24/47 and M48
    - Note this mount will not fit any other Mauser rifles other than the K98 and Yugo series
    - Will Not fit older 1891 and similar small ring Mauser rifles
    - Includes detailed installation instructions
    - We recommend using blue loc-tite thread locking compound ( Not Included ) on these rings

Includes mounting screws and set screws. Easy installation on Mil-Spec K98 rifles. No permanent modifications. Replaces the rear sight leaf on your K98 rifle. Features various cross slots that will accept most weaver/picatinny style scope rings. This mounts sits forward of the bolt handle so there is no need to bend or modify your bolt handle. You must use a long eye relief scope or red dot/reflex sight with no magnification in order to obtain a proper sight picture with this forward mounted scout rifle type setup.

Fits K98 Military Spec rifles and sporter rifles that where built from Mil-Spec K98 rifles including Yugo M48 and Yugo M24/47. The most critical dimension to verify is the width of your rear sight base. This dimension must be very similar if not identical to the width of this scope mount in order to allow for a proper fit.

Please be aware that some K98 rifles made during the War years and also some K98 rifles that where rearsenaled may have a different rear sight base than original Military spec. If your rifle falls into this category, this mount may not fit or will require some gunsmithing work.

   


SCOPE RING FEATURES

    - Material: Aluminum
    - Color: Matte black
    - Fits most 7/8" wide Weaver and Picatinny style rails
    - Includes 2 rings
    - Ring Internal Diameter: 1"
    - Profile: Low
    - Saddle Height: 0.385"
    - Total Height: 1.475"
    - Approx Weight Per Ring: 1.3 oz.
    - Screws (per ring): 2
    - Will accept scopes with 1" tube diameter
    - Designed to handle recoil
    - The screw bolt also acts as a recoil lug to index across your rail systems cross slots and prevent movement
    - We recommend using blue loc-tite thread locking compound ( Not Included ) on these rings


CALIFORNIA PROPOSITION 65 WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov

   

Brand New Item With Manufacture Warranty Against Defects
____________________________________


Add to Cart:

  • Model: MN404+ABMSRMNT
  • Manufactured by: M1Surplus


This product was added to our catalog on Saturday 04 May, 2019.

Copyright © 2019 m1surplus.com