USA Made - ATI Strikeforce Gen2 AK47 AK74 Folding Stock & Forend

  • Model: RR/C.2.10.1250
  • 3 Units in Stock
  • Manufactured by: ATI

 Ask a Question 

$139.99


Max: 2
Add to Cart:
Made in the USA by Advanced Technology Inc ATI Black Color Strikeforce stock Gen 2 for AKM AK47 AK-47 Rifles No shipping to California, Illinois, Connecticut, District of Columbia, Guam, Hawaii, Maryland, Massachusetts, New Jersey, New York, Puerto Rico, Washington State, Military APO/FPO or any other location where such items are prohibited or restricted

THIS ITEM QUALIFIES FOR FREE SHIPPING

FEATURES

    - Made in the USA by Advanced Technology Inc ( ATI )
    - Manufacture Part# C.2.10.1250
    - Model: Strikeforce Gen2 TactLite Stock & Forend Package w/ Scorpion Recoil System
    - Color: Black
    - Material: Extreme Temperature Glass Reinforced Polymer
    - Fits: Most AK-47 AK-74 stamped receivers.

*Will not fit MAK90 rifles

*Will not fit milled receivers

*Will not fit and cannot be used with AK pistols

*Will NOT fit rifles with Slant-Cut receivers

*Will not fit ZASTAVA rifles or the O-PAP/N-PAP M-70. (The M-70 has a stamped receiver, but utilizes a different principle of attaching the stock and the gas piston is longer than a standard AK.)

*Not compatible with any AK-47 that has an under-folding stock or was originally designed to have an under-folding stock like the NMH-90, etc.


*This item will NOT fit all AK type rifles because many of these configurations have dimensions and features that are different from the traditional Mil-Spec pattern. This will cause issues with installation. This item will "ONLY" fit rifles that have True Mil-Spec dimensions in the critical areas where the grip, stock and handguards attach to.  If your rifle has a stock, grip, forend attachment location that is not the same spec or type as the standard AK Mil-Spec pattern, this item may not fit or will require some modification for installation. We highly recommend that you have the product installed by a certified armorer that is familiar with the AK platform.

Six-Position Adjustable Side-Folding Strikeforce Stock with Scorpion Recoil System, Ventilated Handguards, Pistol Grip and Adjustable Cheekrest

    - 6 Position Adjustable Side-Folding Stock
    - Can be Fired from Folded Position
    - TracLOCK System
            * Eliminates Horizontal & Vertical Movement of the Stock on the Buffer Tube
            * Provides Smooth Secure Stock Adjustments
            * Eliminates the Need for Secondary Locking Mechanisms
    - No Snag Points
    - Dual-Sided QD Attachment Point

Scorpion Recoil System Helps Absorbs Recoil Energy

    - Scorpion Razorback Recoil Pad is Non-Slip and Removable
    - Scorpion Recoil Pistol Grip is Ergonomic with Sure-Grip Texture
    - Recoil Impact is Absorbed when Shooting any Load Size can now be Done reducing the felt recoil by the Shooter
    - Not Affected by Chemicals
    - Remains Flexible in Extreme Temperatures
    - Removes Limitations from Spring and Piston Type Recoil Suppression Systems

Ergonomic, Textured and Ventilated Upper and Lower Handguards

    - Includes 4 Picatinny Rails
    - One 4 inch Picatinny Rail
    - Two 2 inch Picatinny Rails
    - One 2 inch Picatinny Rail with Swivel Stud

Blank Inserts for when Rails are not in use

    - Removable/Adjustable Tactical Cheekrest
    - Elongated Design to Fit All Users
    - Includes Short Cheekrest with 1/2 inch of Adjustment

Slot for Tactical Sling Attachment
   
    - 3 Sling Swivel Studs
    - Includes Steel T-Nut and Bolt
    - DuPont® Extreme Temperature Glass Reinforced Polymer

Manufactured in the USA with a Limited Lifetime Manufacture Warranty


Side Folding Stock Note: Your firearm must meet SEC 922R requirements to retain the adjustable buttstock in the folding buttstock configuration. If your firearm does not meet the SEC 922R requirements, you must equip the firearm with a fixed position and non-folding buttstock.

SEC 922R: Stocks, handguards and pistol grips are Manufactured in the USA and count towards compliance parts. Contact your local gun shops or shooting ranges for this and other compliance issues.

Warning!!! - Do Not Over Tighten Screws
Stripped Holes and Broken Screw Heads are NOT Covered Under the Warranty 


CALIFORNIA PROPOSITION 65 WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov



Brand New With Manufacture Warranty
____________________________________

No shipping to California, Illinois, Connecticut, Delaware, District of Columbia, Guam, Hawaii, Maryland, Massachusetts, New Jersey, New York, Puerto Rico, Washington, Military APO/FPO or any other location where such items are prohibited

Some locations may allows certain individuals to possess these products with special licensing but regardless of this, we will Not ship to ANY of these prohibited locations under any circumstances

This item may not be exported outside the USA (  Orders from re-shipping companies will not be accepted )

Billing and shipping address must not be located in any of these prohibited locations

Due to constantly changing laws pertaining to such items, the shipping restrictions for this product may be changed at any given time without notice

It is the responsibility of the buyer to research and obey all applicable local, state, and federal laws in regard to the possession, use, and sale of any products purchased from M1Surplus.com





"The firearm displayed in this listing is NOT included and only shown for display purposes"

This product was added to our catalog on Tuesday 30 October, 2018.

Manufacturers

Your IP Address is: 3.238.142.134